КАТАЛОГ

The universal CHRA assembly plate is used to correctly restrain the CHRA assembly when torquing the shaft locnut, always tighten the shaft nut to the correct torque values.

Exhibition model of a turbocharger. Made from real auto part. The double coloring and wide cutout make it easy to see and examine the core of the turbocharger and all the small components inside. And also understand the principle of operation of this unit in the car. // The real product may differ from what is shown in the photo - the Exhibition model can be made from a turbocharger of any model.

VISCOM FLOWBENCH EDITION | COMFORT Technical specifications: Voltage: 230V / 50 Hz - Current: 10A - Dimensions mm: L:1200 B:690 H:1430 - Weight : 240 kg Scope of supply: - complete TM-A Adaptersystem® (for about of all turbocharger types incl.) - Industrial PC - Windows Embedded (Industrie) on Board- Network Printer (Optional) - Monitor (Industrie Touchscreen 15“) - Records of over 650 turbocharger references on board- Internet on Board - Compressor fuse - Operating Manual - USB Update (optional)

The TP-TACT device is intended for testing the operation and programming of the range of work of electronic turbocharger controllers. With TP-TACT it is possible to perform the following tests: test of electronic controllers of turbochargers with wastegate test of electronic actuators of turbochargers with variable geometry (VTG, VNT). test of dc motors from turbocharger actuators, test of wastegate position sensors or variable geometry position sensors, test of solenoid valves controlling turbocharging pressure, used in pneumatic systems. Tests can be performed on the following actuators: HELLA actuators – used in many car makes, including: VW/Audi, Mercedes, BMW, Ford, Volvo, Jaguar, Citroen, Land Rover, Dodge, Chevrolet. SIEMENS actuators – used in VW/Audi, Mercedes, BMW, and Porsche cars. MITSUBISHI actuators – used in BMW, Ford 2.2 TDCI, and PSA Group cars with 2.2 HDI engine. SONCEBOZ actuators – used in Land Rover 3.6 TDV8 and 2.7 TDV6, DENSO actuators – used in Toyota cars with 1.4 D-4D and 3.0 D-4D engines, MAHLE actuators – used in VW Group cars with 1.2 TSI engine. HITACHI actuators – used in Opel cars with 3.0 V6 CDTI 184HP engine. TP-TACT can also be used for reading and programming the range of lever movement of electronic turbocharger actuators. It can do the following things: read parameters of HELLA actuator operation save parameters of HELLA actuator operation copy HELLA actuators change the range of lever movement of HELLA actuator program the range of movement of SIEMENS actuator Programming the range of work concerns the following turbocharger actuators: HELLA actuators with the following markings: 712120 730314 781751 763797 SIEMENS actuators used in turbochargers meant for VW/Audi group cars with 2.7 TDI and 3.0 TDI engines. The TP-TACT device can be successfully used both in companies regenerating turbochargers, as well as in automobile repair shops that offer a wide range of repairs in order to diagnose the turbocharger fault. Contents of TP-TACT kit: TP-TACT tester HELLA connection cable (6NW 008 091, 6NW 008 412, 6NW 009 228, 6NW 009 420, 6NW 009 543, 6NW 009 660, 6NW 010 099-01) HELLA connection cable (6NW 009 206, 6NW 009 550, 6NW 009 483, 6NW 010 430-01, 6NW 010 430-03, 6NW 010 430-04) HELLA connection cable (6NW 010 099-02) MITSUBISHI connection cable for BMW MITSUBISHI connection cable for Ford/PSA SIEMENS connection cable for VW/Audi SIEMENS connection cable for Mercedes and BMW SONCEBOZ connection cable MAHLE connection cable DENSO connection cable for Toyota 1.4 D-4D DENSO connection cable for Toyota 3.0 D-4D HITACHI connection cable for Opel Vectra C/Signum 3.0 V6 geometry position sensor connection cable for VW/Audi (type 1) geometry position sensor connection cable for VW/Audi (type 2) geometry position sensor connection cable for Opel, Fiat, Alfa Romeo geometry position sensor connection cable for Citroen, Peugeot. geometry position sensor connection cable for Ford universal connection cable for: - DC motors - geometry position sensors - boost control solenoid valves DC power supply USB cable for firmware update CD-ROM with Updater tool User Manual

TURBO-PROG supports two types of turbo actuators: Hella, Siemens. For Hella actuators TURBO-PROG allows the user to : read actuator parameters, store actuator parameters in device internal memory, program actuator parameters, copy actuator parameters. The term 'actuator parameters' means the following information: actuator type, gearbox number of compatible gearbox, version of actuator firmware, range of operation of geometry lever. For Siemens actuators TURBO-PROG allows the user to : program range of operation of geometry lever, check range of movement of an actuator. Kit content TurboProg device, DC power supply, User Manual, Hella connection cable, Siemens connection cable, USB cable and Updater Tool